무제 문서
무제 문서






 
  XTA GQ600
  XTA
 
 
  *
  3,700,000 원
  3,700,000 원

H.F Trim section with adjustable gain and frequency allows fast adjustments to be made to overall H.F response. This obviates the need for system re-voicing when, for example, changes in humidity or audience size occur.

Filter design is carefully optimised for good interpolation and improved narrow band performance.

Excellent noise and distortion performance.

High quality long throw 45mm sliders are used, improving resolution whilst eliminating the need for range switching. Sweepable high-pass filter is provided.Inputs and outputs are fully electronically balanced as standard.

A fixed frequency 18 dB/octave low-pass filter is provided for increasedH.F driver protection.

Both XLR and Klippon "quick-wire" connectors are provided. Peak level indicators give prior warning of onset of clipping anywhere inthe equaliser.

Relay fail-safe bypass is provided, with turn-on delay.

Gain control and EQ in/out switch for each channel.



상세설명


- 입력형태 : 2 개의 발란스 입력
- 출력형태 : 2 개의 발란스 출력
- 출력 임피던스 : 60 ohms
- 최소 부하 임피던스 : 600 ohms
- 최대출력레벨 : + 20dBm into 600 ohms load
- 주파수응답특성 : +/- 0.5dB 20hz ~ 20khz
- High / Low 필터
High 필터 주파수 : 10hz~150hz,12db/octave H.P
Low 필터 주파수 : 18 dB / octave, 3dB@27khz
- 크기 : 133 × 482 × 237 mm



Inputs Two, electronically balanced [++]
Impedance > 10k ohms
CMRR > 65dB 50Hz - 10kHz
Outputs Two, electronically balanced [++]
Source Imp. < 60 ohms
Min. Load 600 ohms

Max. Level ± 23dBm into 600 ohm load
Gain ± 10dB via rotary control
Frequency Resp. ± 0.5dB 20Hz to 20kHz with controls "flat"

Eq'v. Input Noise <- 100dBm (20Hz - 20kHz un-weighted) with controls "flat"
Distortion @ +18dBm< 0.01% @ 1kHz
Channel Separation > 80dB @ 1kHz Peak Indicator Threshold: + 20dBu

H.F Trim
Filter Type 2nd order, optimum phase, shelving
Frequency 2K - 20kHz
Gain ± 8dB
H.F Trim In/Out Front panel switch with LED

High-pass Filter
Filter Type 12dB/octave H.P
Frequency (-3dB) 10Hz - 150Hz
Low-pass Filter
Filter Type 18dB/octave 3dB @ 27kHz
LPF In/Out Link selectable on PCB
Equaliser Section
Filters 2 x 301/3 octave, 25Hz-20kHz
Filter Type High performance simulated LCR network
Freq. Tolerance ± 3%
Range ± 10dB

Power 110/120 ± 15% @ 50/60Hz
Consumption < 20W

Weight 5.0 kG Net (6.7 kG Shipping)
Size 5.25" (3U) x 19" x 9.3" (133 x 482 x 237mm)
excluding connectors.

Options [++] = Optional transformer balancing.
Perspex security cover.




 
Copyright 1999-2020 Zeroboard / skin by rosun